• FAST • EASY • SAFE!
Our test kits have been developed to enable a safe, simple and cost effective way of testing suspect material around your home or commercial property.
Our kits come with simple step-by-step instructions, Extensive protective equipment, sample bags and pre-paid test at the NVLAP approved laboratory in San Diego.
Unlike other providers our kit includes everything you require including the lab fee. So you can rest assured there will be no further costs or fees to get your sample tested!
Your order will be shipping from one of our warehouses in the USA the same day you order.
Step by step instructions
Our kits come with everything you need to take a sample along with an easy to follow step by step guide.
Cost of shipping is covered in our price (Note you will need to use your own courier to return the samples).
24 hour NVLAP Results
All samples are tested at our NVLAP accredited lab in San Diego dedicated to asbestos testing.
Expert Help Readily Available
When you purchase a kit from us you get access to a dedicated support line for any questions or advice
INSTANT SMS Results
We give you instant SMS notifications of your results and order status!
Whats in the kit?
Frequently Asked Questions? (FAQ)
How many samples do I need?
For almost all products you will require 1 sample per surface e.g if you want to test 1 ceiling you will need 1 sample, if you would like to test 2 ceilings and a wall that would require 3 samples.
What is Asbestos?
Asbestos is a mineral which was used extensively in construction throughout the 1900s. It was added to all kinds of construction materials to give them fireproofing and various other benefits. It was only in 1990 that scientists discovered that asbestos is actually a cancer causing carcinogen responsible for a range of potentially fatal respiratory diseases.
If asbestos containing materials are in good condition and undisturbed then they pose little to no risk to health. It is only when the product is disturbed that fibres are released into the air - This is when asbestos becomes harmful.
Do I have asbestos in my home?
Asbestos was widely used in home construction from 1930 to around 2000, particularly from 1960 onwards. Houses/flats built around this time may contain asbestos materials. Properties built since the mid 80’s are unlikely to have asbestos in the fabric of the building and from 1990 extremely unlikely. Asbestos was outlawed in the Europe in 1999.
We have written article helping you to spot any potential asbestos in your home click here to read our "What asbestos looks like" article.
Where is asbestos found in the home?
Asbestos was commonly used in many ways inside and outside of buildings:
- STEAM PIPES, BOILERS, and FURNACE DUCTS insulated with an asbestos blanket or asbestos paper tape. These materials may release asbestos fibers if damaged, repaired, or removed improperly.
- RESILIENT FLOOR TILES (vinyl asbestos, asphalt, and rubber), the backing on VINYL SHEET FLOORING, and ADHESIVES used for installing floor tile. Sanding tiles can release fibers. So may scraping or sanding the backing of sheet flooring during removal.
- CEMENT SHEET, MILLBOARD, and PAPER used as insulation around furnaces and woodburning stoves. Repairing or removing appliances may release asbestos fibers. So may cutting, tearing, sanding, drilling, or sawing insulation.
- DOOR GASKETS in furnaces, wood stoves, and coal stoves. Worn seals can release asbestos fibers during use.
- SOUNDPROOFING OR DECORATIVE MATERIAL sprayed on walls and ceilings. Loose, crumbly, or water-damaged material may release fibers. So will sanding, drilling, or scraping the material.
- PATCHING AND JOINT COMPOUNDS for walls and ceilings, and TEXTURED PAINTS. Sanding, scraping, or drilling these surfaces may release asbestos.
- ASBESTOS CEMENT ROOFING, SHINGLES, and SIDING. These products are not likely to release asbestos fibers unless sawed, dilled, or cut.
- ARTIFICIAL ASHES AND EMBERS sold for use in gas-fired fireplaces. Also, other older household products such as FIREPROOF GLOVES, STOVE-TOP PADS, IRONING BOARD COVERS, and certain HAIRDRYERS.
- AUTOMOBILE BRAKE PADS AND LININGS, CLUTCH FACINGS, and GASKETS.
Some other areas include:
- Some roofing and siding shingles are made of asbestos cement.
- Houses built between 1930 and 1950 may have asbestos as insulation.
- Asbestos may be present in textured paint and in patching compounds used on wall and ceiling joints. Their use was banned in 1977.
- Artificial ashes and embers sold for use in gas-fired fireplaces may contain asbestos.
- Older products such as stove-top pads may have some asbestos compounds.
- Walls and floors around woodburning stoves may be protected with asbestos paper, millboard, or cement sheets.
- Asbestos is found in some vinyl floor tiles and the backing on vinyl sheet flooring and adhesives.
- Hot water and steam pipes in older houses may be coated with an asbestos material or covered with an asbestos blanket or tape.
- Oil and coal furnaces and door gaskets may have asbestos insulation.
Is it safe to test asbestos suspected material?
Our kits are designed to enable you to safely take a sample from suspected material. They come with complete instructions and Personal Protective Equipment, which meets and exceeds state criteria. Please be wary of other suppliers offering kits without any protection.
What can I test with this kit?
Our kits allow you to test pretty much any solid material for asbestos. Providing you're able to take a small sample and place into our sample bags, then we can test it for asbestos. Unfortunately our kits are unable to take soil samples for contaminated land.
How much material do I need for a sample?
You only need to submit a small sample, we recommend material the size of a quarter.
How long does it take for the results to come back?
Samples are tested within 24hrs of them arriving at the lab. Certificates will be emailed out the same day as results given.
Are my results confidential
Yes, your results are not shared with any 3rd parties and there is no register or record where the results are published. You as the customer & the lab will be the only people who know the results of your sample.